Cisco Transceiver Modules

Cisco 4000 2 port Multi-flex Trunk Voice T1/E1 Module NNIM-2MFT-T1/E1

2 port Multi-flex Trunk Voice/Clear-channel Data T1/E1 Module

Product Specification:
  • Place of Origin : USA
  • Brand Name : CISCO
  • Certification : FCC
  • Model Number : NNIM-2MFT-T1/E1
  • Minimum Order Quantity : 1/unit
  • Delivery Time : 3 days
Inquiry Now
Product Details

 

The Cisco Fourth-Generation T1/E1 Multiflex Trunk Voice and WAN Network Interface Modules

(NIMs) support data and voice applications on the Cisco 4451-X integrated services routers. These

cards combine WAN-interface-card (WIC), voice-interface-card (VIC), ISDN Primary Rate Interface

(PRI), dial-access integration, and channelized-data (CE1T1) functions to provide unparalleled flexibility,

versatility, and investment protection through their many uses. Customers who choose to integrate

data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

 

The T1/E1 modules contain an onboard Cisco Packet Voice Digital Signal Processor Module 4 (PVDM4)

slot, which requires a fourth-generation PVDM4 module. A PVDM4 on the T1/E1 module is necessary

for the voice features. The PVDM4 also provides for echo cancellation of up to 128-ms echo-tail length

for demanding network conditions.

 

Basic T1/E1 data

 

The multiflex trunk (MFT) versions act as WICs, supporting T1, fractional T1, E1, and fractional E1.

To simplify remote management, these modules integrate a fully managed DSU/CSU for T1 deployments

and a fully managed DSU for E1 deployments.

 

E1/G.703 data

 

In addition to the basic T1/E1 data support, the CE1T1 versions also support structured G.703 with

G.704 framing and unstructured E1 (G.703) applications.

 

T1/E1 packet voice

 

All the modules support packet voice applications by providing T1, fractional T1, E1, and fractional

E1 connections to private branch exchanges (PBXs) and central offices, thereby enabling the services

and reducing voice and fax toll charges. An additional onboard PVDM4 is required. Also, each NIM

has its own PVDM4, so each module can be connected to a different service provider with no single

clock domain restriction.

 

Mixed data and packet voice

 

The modules can simultaneously support both data and voice, reducing the complexity and number

of network components and facilitating a graceful migration to bandwidth-efficient packet voice.

 

Mixed data and packet voice with drop and insert

 

You can deploy all the modules as T1/E1 drop-and-insert multiplexers with integrated DSUs/CSUs,

reducing the complexity of the network and the cost of the central-office ports by efficiently combining

time-division multiplexing (TDM) voice (PBX), IP voice, and data on the same trunks.

 

NIM-2MFT-T1/E1 Specification

Capacity

Serial data (channel-group)

2 per port

E1 unframed G.703

Not supported

Voice channel associated signaling (CAS) (ds0-group)

24 per port (T1)

31 per port (E1)

1 per timeslot

PRI (pri-group)

1 per port

Drop and insert

(tdm-group)

24 per port (T1)

31 per port (E1)

1 per timeslot

T1 Network Interface 

Transmit bit rate

1.544 Mbps ±50 bps/32 ppm

Receive bit rate

1.544 Mbps ±50 bps/32 ppm

Line code

Alternate mark inversion (AMI) and binary 8-zero substitution (B8ZS)

AMI ones density

Enforced for n x 56-kbps channels

Framing format

D4 (Super Frame [SF]) and Extended Super Frame (ESF)

Output level (line build-out [LBO])

0, -7.5 or -15 dB

Input level

+1 dB0 down to -24 dB0

Data-terminal-equipment (DTE) interface (WIC mode)

Fractional service

DTE interface (VIC mode)

G.704 or structured

Data-communications-equipment (DCE) interface

G.704 or structured

E1 Network Interface

Transmit bit rate

2.048 Mbps ±100 bps/50 ppm

Receive bit rate

2.048 Mbps ±100 bps/50 ppm

Data rate

1.984 Mbps (framed mode) per E1 port

Clocking

Internal and loop (recovered from network)

E1 national bits

Fixed (nonconfigurable)

Encoding

High-density bipolar three (HDB3)

DTE interface (WIC mode)

Fractional service

DTE interface (VIC mode)

G.704 or structured

DCE interface

G.704 or structured

Module Specifications

Dimensions (H x W x D)

1.25 x 3.50 x 7.24 in. (3.18 x 8.89 x 18.39 cm)

Environmental

●  Operating temperature: 0 to 50°C (32 to 122°F)

●  Storage temperature: -20 to +65°C (-4 to 148°F)

●  Relative humidity: 10 to 85% noncondensing operating; 5 to 95% noncondensing, nonoperating

T1 Compliance (partial list)

●  TIA-968-A

●  CS-03

●  Jate

●  ANSI T1.403

E1 Compliance (partial list)

●  TBR4, TBR12, and TBR13

●  ITU-T G.703, G.704, G.823, and I.431

●  S016 (Australia)

Weight

0.42 lb (191g)

 

 

Cisco 4000 2 port Multi-flex Trunk Voice T1/E1 Module NNIM-2MFT-T1/E1 is sealed in cisco original

box. We will also pack NIM-1MFT-T1/E1 with second box before shipping.

 

Our products will be send via FedEx,DHL,TNT,UPS,EMS and so on.but the buyer is responsible for

customs clearance and pay tariff when the product arrived destination country.

 

Shipping Methods

 

2-4 business days.

 

2-4 business days

 

2-4 business days

 

5-7 business days.

 

Payment Method

T/T,Western Union, HSBC and Money Gram will be accept.Faster payment will help you to get the

items earlier.

Write us

Welcome to our company website, thank you for your letter, we will give you a reply in the first time, would you please leave your information and contact way!